CHATWOOD-MILNER DUPLEX MINOR & MAJOR
BURGLAR AND FIRE - RESISTING
Chatwood-Milner - famous for over a century as the designers and makers of strong rooms, strong room doors, safes and security equipment for banks and business houses throughout the world - offer the new improved "Duplex" Safes for the protection of your cash-in-hand, staff wages, business documents. All your most confidential documents and valuables will be protected in the Duplex Minor or Major Safes which have proved their efficiency by the number of unsuccessful attacks made on them and are now even stronger than before.
The outer and inner bodies of this safe are constructed of best open hearth steel plates with a total thickness of 9/16" (14.3 mm.). The space between the outer and inner bodies is filled with improved fire-resisting composition.
The total thickness of the door is 5 1/16" (128.6 mm.). The minimum thickness over the lock mechanism is 1 3/8 (34.9 mm.) including a layer of manganese steel 3/16" (4.8 mm.) thick for protection against cutting tools. The door is designed to resist explosives and forcing tools, and incorporates a fire-resisting chamber.
The door is securely held in its seating by four sliding round steel bolts, three at the front 1 3/8 (34.9 mm.) in diameter and one at the rear 1" (25.4 mm.) diameter. The bands and centres forming the hinges are entirely concealed and when the door is closed it is not possible to discover whether the door is hung left-handed or right-handed.
The door chamber of this safe is an integral part of the door.
The sliding bolts are normally controlled by a best quality unpickable ten-lever double bitted key-lock with rustless keys supplied in duplicate. If the door is closed into its seating and the key withdrawn the safe is automatically locked. The following locking arrangements are also available at extra cost:
A 'Manifoil' 3 Wheel Combination Lock can be fitted in place of the key lock.
One'Manifoil' 3 Wheel Combination Lock in lieu of Keylock,
One4 Wheel Combination Lock in lieu of Keylock, (as illustrated on front cover),
One Keylock and one 'Manifoil' Combination Lock,
Two'Manifoil' Combination Locks.
SECONDARY LOCKING DEVICE
This is fitted to provide protection in the event of the normal locking control being disturbed by explosives, and comes into operation automatically every time the safe is locked.
This safe can be supplied without internal fittings or with one drawer at the bottom, having an overall height of 4 9/32" (108.7 mm.).
The safe can be supplied without internal fittings or with any of the following arrangements
(a) removable steel shelf dividing the safe into two equal compartments, each 11 3/4" (298.5 mm.) high,
(b) single drawer fitment,
(c) double drawer fitment, consisting of two drawers side by side.
Drawer fitments are 4 3/4" (120.7 mm.) high overall.
When a drawer fitment is supplied, a shelf can also be fitted, dividing the space above the drawer fitment into two equal compartments each 9 3/8" (238.1 mm.) high.
The safe is painted in a pleasing shade of smoke grey with chromium plated furniture.