Leamington MK 0
Overall thickness of 3 1/3" (84mm) with outer and inner plates of tough steel and a filling of solid fire resisting material.
The steel doorplate is reinforced to form a rigid door section with an overall thickness of 3 5/8" (92mm). The lock and vital parts are protected by a further layer of toughened drill resisting steel giving a total metal thickness of 11/16" (18mm). A steel pan of fire resisting material is fixed to the back of the door to complete the all-round fire protection.
The safe door is secured by five 1 1/8" (29mm) moving bolts — 3 at the front and one each at the top and bottom. A further 3 fixed bolts engage in the body of the safe at the hinge side. These bolts are controlled by a Chubb best quality 7-lever keylock. At extra cost a second keylock can be fitted if required, or a three code keyless combination lock in lieu of the keylock.
A vital feature is the special relocking mechanism synchronised with the lock which keeps the bolts in the closed position if an attempt is made to dislodge the lock by explosives.
Exterior Dark grey hammer
Interior Dark grey satin
Fittings Satin chrome
Provision is made for anchoring devices to suit either wooden or concrete floors as an optional extra. It is strongly recommended that these safes be anchored to the floor. Various devices are available dependent on the type of floor in a particular location.
Emergency relocking device to secure the bolts if explosives are used on the lock.
All round fire protection, including the back of the door.
Strong and rigid construction.
Best Quality CHUBB seven-lever lock with monitor action.
Steel base fitting attachments.