SLS Cashguard A/T MK 2 Safes
The SLS Cashguard A/T Mk 2 offers full six-sided torch and tool protection, based on the Zacalum door and body casting. The range is available in five sizes, offering high protection/low weight ratios.
Safe Body — The 1/4" (6mm) inner steel lining is surrounded by a Zacalum bell with a minimum thickness of 1 5/16" (33 mm). Additional protection to the locking mechanism from sides and top is provided by cast chrome iron anti-drill plates. The one-piece body casting is surrounded by Wirand/Bascrete, an extremely strong defence against all forms of physical attack. This is contained within the 1/4" (6mm) outer body, giving an overall body thickness of 3 1/2".
Safe Door — A Zacalum casting 1 3/8" (35 mm) thick, provides major torch and drill resistance. Additional drill protection is afforded over the vital locking area by SLS superamics (vitrified ceramic pegs held in an S/S alloy matrix). Total protective door thickness including a Zacrete infill is 3" (76 mm).
Bolt Work — Moving boltwork of 1 1/4" (30mm) diameter polished steel, on three sides of the door plus fixed bolts on the rear edge, all locking directly into the inner lining, makes an integral unit giving exceptional resistance to both explosive and wedge attack.
Re-Locking Devices — Live and dead relocking devices are fitted in random positions, connected to a toughened glass plate via multistranded enclosed wires, providing a sophisticated and substantial deterrent.
Locking — An SLS 7-lever keylock, changeable keylock or a 4-wheel keyless combination lock, with spyproof dial, can be fitted. Standard provision is made for the additional protection afforded by dual locking and locks are interchangeable.
TIME LOCK — A 144-hour 2 or 3 movement timelock can be fitted to all except the 2316 size (if dual locking).
Internal Fittings — A full range of safe furniture, i.e. shelves, lockable half and full width drawers and lockable cupboards are available. Floor Anchoring — All safes are prepared for base-fixing using a high tensile bolt — suitable for either concrete or wood floors. SLS strongly recommend the base-fixing of all free-standing safes.
Deposit Facilities — The SLS Cashguard A/T Mk 2 can be equipped with a deposit chute for use with plastic capsules. Alternatively, an anti-tool and torch rotary trap using deposit boxes with seals, capable of storing paper monies flat, is also available.
Finish – The Cashguard is attractively finished in dark hammer brown with contrasting semi-matt light brown impala on the doors and interior. A satin polished aluminium plate surrounds the handle and locking area.
Independent Fire Test — A one-hour fire test was successfully achieved at Warrington Research Centre (Test Ref. W.R.C.S.I. No 22854/B).